Search

Personal menu

Filters

Auger

Picture for category Digger Auger

Digger Auger

Picture for category Spiradrill Auger

Spiradrill Auger

View as

Sort by

Display per page

Picture of 18" Digger Derrick Dirt Auger

18" Digger Derrick Dirt Auger

65355828

$0.00

The Terex Texoma TXD series dirt augers are manufactured to improve the drilling performance of digger derricks in loose and compacted soils, stiff clay, and soft shale. The optional TX50D 4 tooth pilot bit (T29167) greatly increases the performance of the TXD series augers. These augers are designed with a bolt on shank plate which holds the teeth. This makes for easy replacement of wear parts in the future when the time comes. Simply remove any teeth, pilot bits, or shank plates if they become worn down and replace them with new ones with no welding required. This is a great auger for drilling in dirt while keeping budget in mind. It can be updated in the future for drilling in light rock by adding the TXC carbide teeth and pilot bit. If you plan on drilling in harder materials then you would need a BTA bullet tooth auger. *Product photos are not necessarily the diameter of this product. Stock Photos were used for illustration purposes. SPECIFICATIONS Diameter: 18 inch (457 mm) Overall Length: 104 inch (2642 mm) Hex Size: 2, 2 1/2, and 2 5/8 inch available Stem: 4 inch O.D. 5/16 inch wall DOM heavy duty tubing Auger Teeth: Qty 4 standard TX50 (T29171) Qty 2 outside TX52 (T29249) Shank Plates: Qty 1 TX18X1 (T29200) Qty1 TX18X2 (T29221) Pilot Bit: TX205 fish tail (T21967) Pilot Adapter: TX183 (T29200) Flighting Specs: Length: 60 inch (1524 mm) Thickness: 5/16 inch (8 mm) Pitch: 12 inch (305 mm)

Picture of 60" Bullet Tooth Rock Auger with a 4" Square Kelly Box

60" Bullet Tooth Rock Auger with a 4" Square Kelly Box

60RK

$0.00

Diameter: 60 inch (1524 mm) Overall Length: 47 inch (1193.8 mm) Kelly Box: 4 inch square (101.6 mm) Flighting Specs: Length: 30 inch (762 mm) Thickness: 1 inch thick (25.4 mm) Pitch: 30 inch (762 mm) Auger Teeth: RC31HD (TA001537) Pilot Bit: Cast steel 4 tooth with 3 inch square shank (TA002069) Pilot Teeth: Four replaceable RC31HD (TA001537) Pilot Size: 6 3/4 inch cut diameter (171.5 mm)

Picture of 24" Dirt Auger

24" Dirt Auger

65355860

$0.00

TEREX 24" DIGGER DERRICK DIRT AUGER The Terex Texoma TXD series dirt augers are manufactured to improve the drilling performance of digger derricks in loose and compacted soils, stiff clay, and soft shale. The optional TX50D 4 tooth pilot bit (T29167) greatly increases the performance of the TXD series augers. These augers are designed with a bolt on shank plate which holds the teeth. This makes for easy replacement of wear parts in the future when the time comes. Simply remove any teeth, pilot bits, or shank plates if they become worn down and replace them with new ones with no welding required. This is a great auger for drilling in dirt while keeping budget in mind. It can be updated in the future for drilling in light rock by adding the TXC carbide teeth and pilot bit. If you plan on drilling in harder materials then you would need a BTA bullet tooth auger. *Product photos are not necessarily the diameter of this product. Stock Photos were used for illustration purposes. SPECIFICATIONS Diameter: 24 inch (610 mm) Overall Length: 104 inch (2642 mm) Hex Size: 2, 2 1/2, and 2 5/8 inch available Stem: 4 inch O.D. 5/16 inch wall DOM heavy duty tubing Auger Teeth: Qty 5 standard TX50 (T29171) Qty 2 outside TX52 (T29249) Shank Plates: Qty 1 TX24X1 (T29193) Qty1 TX24X2 (T29194) Pilot Bit: TX205 fish tail (T21967) Pilot Adapter: TX183 (T29200) Flighting Specs: Length: 60 inch (1524 mm) Thickness: 5/16 inch (8 mm) Pitch: 15 inch (381 mm)

Picture of 18" Digger Derrick Spiral Bullet Tooth Auger

18" Digger Derrick Spiral Bullet Tooth Auger

65355927

$0.00

The Terex Texoma spiral bullet tooth augers (BTASP) are designed specifically to optimize the drilling performance of digger derricks in extreme conditions. The Terex spiral augers have a unique cutting pattern that allows each tooth to cut a small track which improves cutting efficiency and tooth life. The cut pattern and tooth attack angle combine to allow the bullet teeth to act as “fingers” that penetrate thru and lift up fractured or broken material These spiral bullet tooth augers perform much better and can drill hard materials that conventional augers can't. This saves you time, money, and dramatically reduces equipment wear. In many cases a digger derrick equipped with a spiral BTA can drill in conditions previously requiring a pressure digger. This could save you from having to rent a drill rig at a much higher cost than standard line trucks. This tool also works with the digger derrick core barrel with extendable pilot bit option to increase functionality and increase productivity. *Product photos are not necessarily the diameter of this product. Stock Photos were used for illustration purposes. SPECIFICATIONS Diameter: 18 inch (457.2 mm) Overall Length: 104 inch (2642 mm) Hex Size: 2 1/2, and 2 5/8 inch available Stem: 4 inch O.D. 5/16 inch wall DOM heavy duty tubing Flighting Specs: Length: 60 inch (1524 mm) Lower Thickness: 1 inch (25.4 mm) Upper Thickness: .5 inch (13 mm) Pitch: 12 inch (305 mm) Auger Teeth: C10 (65349086) Pilot Bit: Spiral hex 2 5/8 inch shank (65357524) Pilot Teeth: Six replaceable C10 (65349085)

Picture of 24" Digger Derrick Spiral Bullet Tooth Auger

24" Digger Derrick Spiral Bullet Tooth Auger

65355932

$0.00

The Terex Texoma spiral bullet tooth augers (BTASP) are designed specifically to optimize the drilling performance of digger derricks in extreme conditions. The Terex spiral augers have a unique cutting pattern that allows each tooth to cut a small track which improves cutting efficiency and tooth life. The cut pattern and tooth attack angle combine to allow the bullet teeth to act as “fingers” that penetrate thru and lift up fractured or broken material These spiral bullet tooth augers perform much better and can drill hard materials that conventional augers can't. This saves you time, money, and dramatically reduces equipment wear. In many cases a digger derrick equipped with a spiral BTA can drill in conditions previously requiring a pressure digger. This could save you from having to rent a drill rig at a much higher cost than standard line trucks. This tool also works with the digger derrick core barrel with extendable pilot bit option to increase functionality and increase productivity. *Product photos are not necessarily the diameter of this product. Stock Photos were used for illustration purposes. SPECIFICATIONS Diameter: 24 inch (610 mm) Overall Length: 104 inch (2642 mm) Hex Size: 2 1/2, and 2 5/8 inch available Stem: 4 inch O.D. 5/16 inch wall DOM heavy duty tubing Flighting Specs: Length: 60 inch (1524 mm) Lower Thickness: 1 inch (25.4 mm) Upper Thickness: .5 inch (13 mm) Pitch: 15 inch (381 mm) Auger Teeth: C10 (65349086) Pilot Bit: Spiral hex 2 5/8 inch shank (65357524) Pilot Teeth: Six replaceable C10 (65349085)